2016 Honda CBR600RR ABS Review | Specs / Pictures / Videos

UNDER CONSTRUCTION

2016 CBR600RR ABS Specifications
Publication Order Numbers: Specification
Service Manual: 61MJC02
Owner’s Manual: 31MJC620
Engine: Specification, Units: mm (in)
Cylinder arrangement: 4 cylinders in-line, inclined 40° 45’ from vertica
Bore and stroke: 67.0 x 42.5 mm (2.64 x 1.67 in)
Displacement: 599 cm³ (36.5 cu-in)
Cylinder compression at rpm: 1,363 kPa (13.9 kgf/cm², 198 psi) at 310 rpm
Standard: 0.015 – 0.050 (0.0006 – 0.0020)
Service Limit: 0.10 (0.004)
Intake: 0.20 ± 0.03 (0.008 ± 0.001)
Exhaust: 0.28 ± 0.03 (0.011 ± 0.001)
Recommended engine oil/classification/viscosity: Pro Honda GN4 or HP4 4-stroke oil/API SG/SAE 10 W-30
Oil capacity after draining/engine oil filter change: 2.8 liters (3.0 US qt, 2.5 Imp qt)
Oil pressure at oil pressure switch: 505 kPa (5.1 kgf/cm², 73 psi) at 6,000 rpm
Final Drive: Specification
C/S sprocket: 16
Rear sprocket: 42
Drive chain size (x) links: 525 x 112
Drive chain slack: 30 – 40 mm (1.2 – 1.6 in)
Cooling System: Specification
Recommended antifreeze/concentration: Ethylene glycol antifreeze/1:1 w/distilled water
Coolant capacity,radiator and engine: 3.00 liters (3.17 US qt, 2.64 Imp qt)
Fuel System: Specification
Type/throttle bore: PGM-FI/40 mm (1.6 in)
Carburtetor/throttle body ID #: 49 State type: GQ6KC/50 State type: GQ6KB
Idle speed (+/- 100 rpm): 1,400 ± 100 rpm
Fuel pressure at idle: 343 kPa (3.5 kgf/cm², 50 psi)
Starter valve vacuum difference: N/A
Throttle grip/lever free play: 2 – 4 mm (1/16 – 3/16 in)
Suspension: Specification
Recommended fork fluid: Pro Honda suspension fluid SS-47 (10W)
Fork fluid capacity/and level: 486 ± 2.5 cm³ (16.4 ± 0.08 US oz)/74 mm (2.9 in)
Tires: Specification
Front  Size: 120/70ZR17M/C(58W)
Cold tire pressure: 250 kPa (2.50 kgf/cm², 36 psi)
Rear  Size: 180/55ZR17M/C(73W)
Cold tire pressure: 290 kPa (2.90 kgf/cm², 42 psi)
Battery/Charging System: Specification
Charging system type: Triple phase output alternator
BatteryCapacity/Model: 12 V – 8.6 Ah/YTZ10S
Fully charged: 13.0 – 13.2 V
Needs charging: Below 12.4 V
Normal: 0.9 A/5 – 10 h
Quick: 4.5 A/1 h
Regulated voltage at rpm: Measured BV < Measured CV < 15.5 V @ 5000 rpm
Alternator charging coil resistance: 0.1 – 1.0 ?
Lighting Equipment: Specification
Hi: 12 V – 55 W
Lo: 12 V – 55 W
Brake/tail light: LED
Front turn signal/running light bulb: 12 V – 21/5 W x 2
Rear turn signal light bulb: 12 V – 21 W x 2
Ignition System: Specification
Ignition system type: Computer-controlled digital transistorized with el
Ignition timing (F mark): 8 ± 2° BTDC at idle
DENSO: VUH27D
Spark plug gap: 0.80 – 0.90 mm (0.031 – 0.035 in)
Ignition coil peak voltage: 100 V minimum
Ignition pulse generator peak voltage: 0.7 V minimum
Torque value: Specification, Unit: N.m (kgf.m, lbf.ft)
Front axle bolt/nut: 59 (6.0, 44)
Front axle holder/pinchbolt/nut: 22 (2.2, 16)
Rear axle nut: 113 (11.5, 83)

Menu